做音乐网站的条件,网站开发经理岗位职责,网站后台登录不显示验证码,懒人之家网站模板文章目录 服务器配置使用kubekey部署k8s1. 操作系统基础配置2. 安装部署 K8s2.1 下载 KubeKey2.2 创建 K8s 集群部署配置文件 3. 验证 K8s 集群3.1 验证集群状态 4. 部署测试资源5.验证服务 服务器配置
主机名IPCPU内存系统盘数据盘用途vm-16-11-ubuntu192.168.9.131128256Gi5… 文章目录 服务器配置使用kubekey部署k8s1. 操作系统基础配置2. 安装部署 K8s2.1 下载 KubeKey2.2 创建 K8s 集群部署配置文件 3. 验证 K8s 集群3.1 验证集群状态 4. 部署测试资源5.验证服务 服务器配置
主机名IPCPU内存系统盘数据盘用途vm-16-11-ubuntu192.168.9.131128256Gi500GB1TBk8s-mastervm-16-16-ubuntu192.168.9.132128256Gi500GB1TBk8s-mastervm-16-7-ubuntu192.168.9.133128256Gi500GB1TBk8s-master
实战环境涉及软件版本信息
操作系统Ubuntu 20.04 LTSK8sv1.28.8Containerd1.7.13KubeKey: v3.1.1
使用kubekey部署k8s
1. 操作系统基础配置
主机名、DNS解析、时钟同步、防火墙、系统依赖软件等忽略
apt-get install -y install curl socat conntrack ebtables ipset ipvsadm2. 安装部署 K8s
2.1 下载 KubeKey
https://github.com/kubesphere/kubekey
下载最新版的 KubeKey
rootVM-16-7-ubuntu:~# mkdir ~/kubekey
rootVM-16-7-ubuntu:~# cd ~/kubekey
rootVM-16-7-ubuntu:~/kubekey# curl -sfL https://get-kk.kubesphere.io | sh -Downloading kubekey v3.1.1 from https://github.com/kubesphere/kubekey/releases/download/v3.1.1/kubekey-v3.1.1-linux-amd64.tar.gz ...Kubekey v3.1.1 Download Complete!rootVM-16-7-ubuntu:~/kubekey# ll
total 116376
drwxr-xr-x 2 root root 4096 May 7 17:50 ./
drwx------ 7 root root 4096 May 7 17:49 ../
-rwxr-xr-x 1 root root 81950729 Apr 16 12:30 kk*
-rw-r--r-- 1 root root 37206726 May 7 17:50 kubekey-v3.1.1-linux-amd64.tar.gz查看 KubeKey 支持的 Kubernetes 版本列表 ./kk version --show-supported-k8s
rootVM-16-7-ubuntu:~/kubekey# ./kk version --show-supported-k8s
...
v1.28.0
v1.28.1
v1.28.2
v1.28.3
v1.28.4
v1.28.5
v1.28.6
v1.28.7
v1.28.8
v1.29.0
v1.29.1
v1.29.2
v1.29.3
rootVM-16-7-ubuntu:~/kubekey#
rootVM-16-7-ubuntu:~/kubekey# ./kk create config -f k8s-v1288.yaml --with-kubernetes v1.28.8
Generate KubeKey config file successfully2.2 创建 K8s 集群部署配置文件
创建集群配置文件
本文选择了 K8s v1.28.8。因此指定配置文件名称为 k8s-v1288.yaml/
rootVM-16-7-ubuntu:~/kubekey# ./kk create cluster -f k8s-v1288.yaml _ __ _ _ __
| | / / | | | | / /
| |/ / _ _| |__ ___| |/ / ___ _ _
| \| | | | _ \ / _ \ \ / _ \ | | |
| |\ \ |_| | |_) | __/ |\ \ __/ |_| |
\_| \_/\__,_|_.__/ \___\_| \_/\___|\__, |__/ ||___/17:56:57 CST [GreetingsModule] Greetings
17:56:58 CST message: [VM-16-16-ubuntu]
Greetings, KubeKey!
17:56:58 CST message: [VM-16-7-ubuntu]
Greetings, KubeKey!
17:56:58 CST message: [VM-16-11-ubuntu]
Greetings, KubeKey!
17:56:58 CST success: [VM-16-16-ubuntu]
17:56:58 CST success: [VM-16-7-ubuntu]
17:56:58 CST success: [VM-16-11-ubuntu]
17:56:58 CST [NodePreCheckModule] A pre-check on nodes
17:56:58 CST success: [VM-16-16-ubuntu]
17:56:58 CST success: [VM-16-7-ubuntu]
17:56:58 CST success: [VM-16-11-ubuntu]
17:56:58 CST [ConfirmModule] Display confirmation form
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
| name | sudo | curl | openssl | ebtables | socat | ipset | ipvsadm | conntrack | chrony | docker | containerd | nfs client | ceph client | glusterfs client | time |
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
| VM-16-7-ubuntu | y | y | y | y | y | y | y | y | | | | y | | | CST 17:56:58 |
| VM-16-11-ubuntu | y | y | y | y | y | y | y | y | | | | y | | | CST 17:56:58 |
| VM-16-16-ubuntu | y | y | y | y | y | y | y | y | | | | y | | | CST 17:56:58 |
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------This is a simple check of your environment.
Before installation, ensure that your machines meet all requirements specified at
https://github.com/kubesphere/kubekey#requirements-and-recommendationsContinue this installation? [yes/no]: yes
17:57:06 CST success: [LocalHost]
17:57:06 CST [NodeBinariesModule] Download installation binaries
17:57:06 CST message: [localhost]
downloading amd64 kubeadm v1.28.8 ...修改配置文件 采用 3 个节点同时作为 control-plane、etcd 和 worker 节点。
编辑配置文件 k8s-v1288.yaml主要修改 kind: Cluster 小节的相关配置
修改 kind: Cluster 小节中 hosts 和 roleGroups 等信息修改说明如下。
hosts指定节点的 IP、ssh 用户、ssh 密码、ssh 端口roleGroups指定 3 个 etcd、control-plane 节点复用相同的机器作为 3 个 worker 节点internalLoadbalancer启用内置的 HAProxy 负载均衡器domain可自定义域名clusterName可使用默认值 cluster.localautoRenewCerts该参数可以实现证书到期自动续期默认为 truecontainerManager使用 containerd
部署完成需要大约 10-20 分钟左右会在终端上看到类似于下面的输出。
daemonset.apps/calico-node created
deployment.apps/calico-kube-controllers created
18:12:37 CST skipped: [vm-16-16-ubuntu]
18:12:37 CST skipped: [vm-16-11-ubuntu]
18:12:37 CST success: [vm-16-7-ubuntu]
18:12:37 CST [ConfigureKubernetesModule] Configure kubernetes
18:12:37 CST success: [vm-16-7-ubuntu]
18:12:37 CST skipped: [vm-16-11-ubuntu]
18:12:37 CST skipped: [vm-16-16-ubuntu]
18:12:37 CST [ChownModule] Chown user $HOME/.kube dir
18:12:37 CST success: [vm-16-16-ubuntu]
18:12:37 CST success: [vm-16-11-ubuntu]
18:12:37 CST success: [vm-16-7-ubuntu]
18:12:37 CST [AutoRenewCertsModule] Generate k8s certs renew script
18:12:37 CST success: [vm-16-16-ubuntu]
18:12:37 CST success: [vm-16-11-ubuntu]
18:12:37 CST success: [vm-16-7-ubuntu]
18:12:37 CST [AutoRenewCertsModule] Generate k8s certs renew service
18:12:37 CST success: [vm-16-16-ubuntu]
18:12:37 CST success: [vm-16-7-ubuntu]
18:12:37 CST success: [vm-16-11-ubuntu]
18:12:37 CST [AutoRenewCertsModule] Generate k8s certs renew timer
18:12:38 CST success: [vm-16-16-ubuntu]
18:12:38 CST success: [vm-16-7-ubuntu]
18:12:38 CST success: [vm-16-11-ubuntu]
18:12:38 CST [AutoRenewCertsModule] Enable k8s certs renew service
18:12:38 CST success: [vm-16-16-ubuntu]
18:12:38 CST success: [vm-16-11-ubuntu]
18:12:38 CST success: [vm-16-7-ubuntu]
18:12:38 CST [SaveKubeConfigModule] Save kube config as a configmap
18:12:38 CST success: [LocalHost]
18:12:38 CST [AddonsModule] Install addons
18:12:38 CST success: [LocalHost]
18:12:38 CST Pipeline[CreateClusterPipeline] execute successfully
Installation is complete.Please check the result using the command:kubectl get pod -A3. 验证 K8s 集群
3.1 验证集群状态
查看集群节点信息
rootVM-16-7-ubuntu:~# kubectl get nodes -owide
NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIME
vm-16-11-ubuntu Ready control-plane,worker 9m46s v1.28.8 172.19.16.11 none Ubuntu 20.04 LTS 5.4.0-174-generic containerd://1.7.13
vm-16-16-ubuntu Ready control-plane,worker 9m43s v1.28.8 172.19.16.16 none Ubuntu 20.04 LTS 5.4.0-174-generic containerd://1.7.13
vm-16-7-ubuntu Ready control-plane,worker 10m v1.28.8 172.19.16.7 none Ubuntu 20.04 LTS 5.4.0-174-generic containerd://1.7.134. 部署测试资源
rootVM-16-7-ubuntu:~# kubectl create deployment nginx --imagenginx:alpine --replicas2
deployment.apps/nginx created
rootVM-16-7-ubuntu:~# kubectl create service nodeport nginx --tcp80:80
service/nginx created
rootVM-16-7-ubuntu:~# kubectl get deployment -o wide
NAME READY UP-TO-DATE AVAILABLE AGE CONTAINERS IMAGES SELECTOR
nginx 2/2 2 2 21s nginx nginx:alpine appnginx
rootVM-16-7-ubuntu:~# kubectl get pods -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-b4ccb96c6-q5c52 1/1 Running 0 21s 10.233.123.1 vm-16-7-ubuntu none none
nginx-b4ccb96c6-wgjh4 1/1 Running 0 21s 10.233.96.1 vm-16-16-ubuntu none none5.验证服务
验证直接访问 Pod
rootVM-16-7-ubuntu:~# curl -I http://10.233.96.1
HTTP/1.1 200 OK
Server: nginx/1.25.5
Date: Tue, 07 May 2024 10:24:00 GMT
Content-Type: text/html
Content-Length: 615
Last-Modified: Tue, 16 Apr 2024 15:47:06 GMT
Connection: keep-alive
ETag: 661e9d7a-267
Accept-Ranges: bytesrootVM-16-7-ubuntu:~# curl -I http://10.233.123.1
HTTP/1.1 200 OK
Server: nginx/1.25.5
Date: Tue, 07 May 2024 10:24:10 GMT
Content-Type: text/html
Content-Length: 615
Last-Modified: Tue, 16 Apr 2024 15:47:06 GMT
Connection: keep-alive
ETag: 661e9d7a-267
Accept-Ranges: bytes验证访问 Nodeport
rootVM-16-7-ubuntu:~# curl http://172.19.16.7:31377
!DOCTYPE html
html
head
titleWelcome to nginx!/title
style
html { color-scheme: light dark; }
body { width: 35em; margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif; }
/style
/head
body
h1Welcome to nginx!/h1
pIf you see this page, the nginx web server is successfully installed and
working. Further configuration is required./ppFor online documentation and support please refer to
a hrefhttp://nginx.org/nginx.org/a.br/
Commercial support is available at
a hrefhttp://nginx.com/nginx.com/a./ppemThank you for using nginx./em/p
/body
/html
